10.1.1.1 Login Admin
To access the router admin page, simply enter 10.1.1.1 into your web browser's address bar or click the link below. This will direct you to the login page of your router's control panel.
The IP address displayed here is typically the default address for your router’s admin interface. However, please ensure that you are connected to the same network as the router for this to work correctly. If you are using a different network or have made custom settings, the address may vary.
How to log in to 10.1.1.1
- Connect to the router. Join its Wi-Fi network or plug a computer into one of its LAN ports. Mobile data will not work.
- Open the admin page. Type
http://10.1.1.1into the browser’s address bar (not the search box) and press Enter. - Accept the certificate warning if one appears. Routers use self-signed certificates, so “Not secure” on this page is normal inside your own network.
- Enter the username and password. Look at the sticker on the bottom of the router first: many models print a unique password there.
- Change the default password in the administration or system section as soon as you are in.
Default logins for IP 10.1.1.1
Who uses 10.1.1.1 by default
Router models in our database with 10.1.1.1 as the default address: 3. Brands: 1.
Brands with the most models on 10.1.1.1
| Brand | Models |
|---|---|
| Belkin | 3 |
Most common default username and password on 10.1.1.1
| Username | Password | Models |
|---|---|---|
admin |
— | 2 (67%) |
| — | — | 1 (33%) |
“—” means there is no factory value: the field is left empty or a unique password is printed on the router’s label.
Default credentials work only until someone changes them. If none of these pairs fits, the password was changed; a factory reset restores the default.
Updated October 23, 2026 · Source: RFC 1918, Address Allocation for Private Internets
10.1.1.1: a few Belkin models and many hand-made networks
10.1.1.1 is a private address in the 10.0.0.0/8 block that RFC 1918 reserves for local networks. Our database lists three Belkin models with 10.1.1.1 as the factory address, all versions of the BoB modem-router (F1PI243EGau) that the Australian provider iiNet supplied to its customers. Most other Belkin routers use 192.168.2.1. Outside these models, 10.1.1.1 is a common choice for networks set up by hand, because the repeating digits are easy to remember.
Logging in
The three Belkin models in our database have no factory password: two use the username admin with an empty password, one has both fields empty. If the router asks for a password you do not know, it was set by whoever configured the network. A factory reset clears it, but it also returns the router to its original address and erases the custom 10.1.1.x network.
How to tell which device is at 10.1.1.1
- Confirm it is your gateway. On Windows, run
ipconfigand look at “Default Gateway”. See how to find the default gateway on other devices. - Open
http://10.1.1.1while connected to that network. The login page usually shows the brand. - Check the label on the router for the model, then look up its brand in our brand list.
When 10.1.1.1 does not open
- Your device is on another network. Its own address should start with 10.1.1.
- It is a work network. Admin pages on managed networks are usually closed to users.
- Do not confuse it with 1.1.1.1. 1.1.1.1 is Cloudflare’s public DNS service on the internet, not a router.
10.1.1.1: frequently asked questions
Which router uses 10.1.1.1?
In our database, versions of the Belkin BoB modem-router supplied by iiNet in Australia. In most other networks it is an address chosen by hand.
What is the password for 10.1.1.1?
The Belkin models on this address have no factory password: admin with an empty password, or both fields empty.
Is 10.1.1.1 the same as 1.1.1.1?
No. 10.1.1.1 is a private address inside a local network; 1.1.1.1 is a public DNS server.
Brands using 10.1.1.1
