Belkin Default Login - Control Panel
Find the default username, password, and IP address for your Belkin router. This guide provides the default login credentials and IP settings for Belkin routers, helping you access the router’s admin page easily and securely.
go to routers models
Default logins for Belkin
How Belkin routers log in by default
Belkin router models in our database: 187. Different default IP addresses: 2.
Default IP addresses of Belkin routers
| IP address | Models |
|---|---|
| 192.168.2.1 | 120 (64%) |
| 10.1.1.1 | 3 (2%) |
Most common default username and password for Belkin
| Username | Password | Models |
|---|---|---|
| — | — | 183 (98%) |
admin |
— | 3 (2%) |
admin |
password |
1 (1%) |
“—” means there is no factory value: the field is left empty or a unique password is printed on the router’s label.
Default credentials work only until someone changes them. If none of these pairs fits, the password was changed; a factory reset restores the default.
Updated October 8, 2026
Belkin router login: older models vs Wi-Fi 6
Belkin routers come in two generations that log in differently. Look at the model number on the label.
- Older Belkin routers (N150, N300, N600, AC series and most models with an F-number such as F9K1001) open at 192.168.2.1. They have no default password: leave the field empty and click Submit.
- Wi-Fi 6 routers RT1800 and RT3200 open at
http://myrouter.localor 192.168.1.1, and the default password isadmin. Their page looks like a Linksys page — see our Linksys login guide.
How to log in to an older Belkin router
- Connect to the router by Wi-Fi or cable.
- Type
192.168.2.1into the browser’s address bar. - Click Login in the top-right corner of the page.
- Leave the password empty (unless you have set one) and click Submit.
- Set a password under Utilities › System Settings, so nobody on your network can change the router.
192.168.2.1 does not open
- Check that the device is connected to the Belkin network, not to a neighbour’s Wi-Fi or mobile data.
- If the Belkin sits behind a modem-router from your provider, it may have a different address. The “default gateway” in your device’s network details shows the real one.
- Turn off any VPN and try another browser.
Forgot the password: factory reset
Press and hold the Reset button for about 10 seconds with the router on, then release it and wait for the lights to settle. Older models return to an empty password; RT-series models return to admin. Wi-Fi name, key and internet settings are reset too.
Belkin: frequently asked questions
What is the default Belkin router password?
Older Belkin routers have none: leave the field blank. RT1800 and RT3200 use admin.
What is the Belkin router IP address?
192.168.2.1 for older models; 192.168.1.1 (or myrouter.local) for the Wi-Fi 6 RT series.
Where is the Login button on the Belkin page?
In the top-right corner. Without logging in the page shows status only.
How do I reset a Belkin router?
Hold the Reset button for about 10 seconds with the router on.
