10.0.0.1 Login Admin
To access the router admin page, simply enter 10.0.0.1 into your web browser's address bar or click the link below. This will direct you to the login page of your router's control panel.
The IP address displayed here is typically the default address for your router’s admin interface. However, please ensure that you are connected to the same network as the router for this to work correctly. If you are using a different network or have made custom settings, the address may vary.
How to log in to 10.0.0.1
- Connect to the router. Join its Wi-Fi network or plug a computer into one of its LAN ports. Mobile data will not work.
- Open the admin page. Type
http://10.0.0.1into the browser’s address bar (not the search box) and press Enter. - Accept the certificate warning if one appears. Routers use self-signed certificates, so “Not secure” on this page is normal inside your own network.
- Enter the username and password. Look at the sticker on the bottom of the router first: many models print a unique password there. The most common factory pair for this address is
admin/password; the full list is in the tables below. - Change the default password in the administration or system section as soon as you are in.
Default logins for IP 10.0.0.1
Who uses 10.0.0.1 by default
Router models in our database with 10.0.0.1 as the default address: 28. Brands: 8.
Brands with the most models on 10.0.0.1
| Brand | Models |
|---|---|
| technicolor | 9 |
| Cisco | 8 |
| SMC | 4 |
| Arris | 2 |
| Intelbras | 2 |
| Aztech | 1 |
| i-connect | 1 |
| RFNet | 1 |
Most common default username and password on 10.0.0.1
| Username | Password | Models |
|---|---|---|
admin |
password |
14 (50%) |
| — | — | 8 (29%) |
admin |
admin |
2 (7%) |
cusadmin |
highspeed |
2 (7%) |
Cisco |
Cisco |
1 (4%) |
highspeed |
cusadmin |
1 (4%) |
“—” means there is no factory value: the field is left empty or a unique password is printed on the router’s label.
Default credentials work only until someone changes them. If none of these pairs fits, the password was changed; a factory reset restores the default.
Updated October 7, 2026 · Source: RFC 1918, Address Allocation for Private Internets
What 10.0.0.1 is
10.0.0.1 is a private address from the 10.0.0.0/8 block, the largest of the three ranges RFC 1918 sets aside for local networks. Home gateways that use it give connected devices addresses such as 10.0.0.2, 10.0.0.15 or 10.0.0.120.
In the United States the address is best known from Comcast Xfinity gateways. The devices themselves are made by Technicolor, Cisco and Arris, which is why these names lead the brand table above.
Logging in to an Xfinity gateway
On an Xfinity gateway, 10.0.0.1 opens the “Admin Tool”. The factory login is admin with the password password; after the first login the gateway asks you to replace it. Xfinity now moves most settings into the Xfinity app and the online account, so some options, such as port forwarding on newer gateways, may be missing from the local page and have to be changed in the app instead.
If you rent the gateway, the provider can update its firmware and reset parts of the configuration remotely. Keep a note of the changes you make so you can repeat them if needed.
10.0.0.1, 10.0.1.1 and 10.0.0.138
These look alike but are different addresses:
- 10.0.0.1 is used by Xfinity and many other cable gateways.
- 10.0.1.1 was the default of Apple AirPort base stations, which are configured with the AirPort Utility app rather than a browser.
- 10.0.0.138 appears on some gateways supplied by internet providers.
The address your devices actually use is the default gateway: here is how to find it.
When 10.0.0.1 does not open
- Your own router is behind the gateway. If you connected an extra router, your device talks to it, not to the Xfinity box. Connect directly to the gateway’s Wi-Fi or a LAN port.
- The gateway is in bridge mode. In bridge mode the local Admin Tool is reduced or switched off; use the Xfinity app, or turn bridge mode off there.
- xFi Advanced Security or a VPN blocks the page. Pause the VPN on your device and try again.
10.0.0.1: frequently asked questions
What is the default password for 10.0.0.1?
On Xfinity gateways the factory login is admin / password. Other devices on 10.0.0.1 may use different pairs; the tables above show the most common ones in our database.
Is 10.0.0.1 safe to open?
Yes. It is a private address that only works inside your home network, so nobody outside can open your gateway through it. Change the default password to keep people on your Wi-Fi out of the settings.
Why are some settings missing at 10.0.0.1?
Xfinity manages part of the configuration through its app and online account. If an option is not on the local page, look for it in the Xfinity app.
Can I use my own router with a 10.0.0.1 gateway?
Yes. Put the gateway in bridge mode so your router gets the public address, or leave it as is and accept double NAT, which can cause problems with gaming and port forwarding.
