192.168.0.1 Login Admin

To access the router admin page, simply enter 192.168.0.1 into your web browser's address bar or click the link below. This will direct you to the login page of your router's control panel.

The IP address displayed here is typically the default address for your router’s admin interface. However, please ensure that you are connected to the same network as the router for this to work correctly. If you are using a different network or have made custom settings, the address may vary.

How to log in to 192.168.0.1

Connect to the router. Join its Wi-Fi network or plug a computer into one of its LAN ports. Mobile data will not work.
Open the admin page. Type http://192.168.0.1 into the browser’s address bar (not the search box) and press Enter.
Accept the certificate warning if one appears. Routers use self-signed certificates, so “Not secure” on this page is normal inside your own network.
Enter the username and password. Look at the sticker on the bottom of the router first: many models print a unique password there. The most common factory pair for this address is admin / admin; the full list is in the tables below.
Change the default password in the administration or system section as soon as you are in.

Default logins for IP 192.168.0.1

IP Address:192.168.0.1 Username:admin Password:admin

43%

IP Address:192.168.0.1 Username:admin Password:password

20%

IP Address:192.168.0.1 Username:- Password:admin

17%

IP Address:192.168.0.1 Username:admin Password:-

Who uses 192.168.0.1 by default

Router models in our database with 192.168.0.1 as the default address: 1,005. Brands: 92.

Brands with the most models on 192.168.0.1

Brand	Models
D-Link	376
TP-LINK	131
Netgear	82
Tenda	71
LevelOne	29
EnGenius	27
Sitecom	27
SerComm	16

Most common default username and password on 192.168.0.1

Username	Password	Models
—	—	305 (30%)
`admin`	`admin`	305 (30%)
—	`admin`	167 (17%)
`admin`	`password`	139 (14%)
`admin`	—	31 (3%)
`cusadmin`	`password`	12 (1%)

“—” means there is no factory value: the field is left empty or a unique password is printed on the router’s label.

Default credentials work only until someone changes them. If none of these pairs fits, the password was changed; a factory reset restores the default.

Updated October 7, 2026 · Source: RFC 1918, Address Allocation for Private Internets

192.168.0.1 and how it differs from 192.168.1.1

192.168.0.1 is the first usable address of the private 192.168.0.0/24 network. A router set to it hands out addresses from 192.168.0.2 upwards to phones and laptops, and serves its admin page at 192.168.0.1 itself.

Devices on your network get addresses like ⁦192.168.0.x⁩ and reach the internet through the router at ⁦192.168.0.1⁩. The address works only inside this network.

The only difference from 192.168.1.1 is the third number, but the two addresses belong to different networks. If your laptop has an address like 192.168.1.23, it will not reach a router at 192.168.0.1, and the other way round. Check your default gateway to see which one your router uses.

Which routers use 192.168.0.1

D-Link is by far the largest group: most of its home routers ship on 192.168.0.1, traditionally with the username admin and an empty password. Newer TP-Link models, a share of Netgear routers and most Tenda routers use the same address. On recent TP-Link and Tenda models there is no fixed password at all: you create it in the setup wizard the first time you open the page.

Brand	Name that also opens the admin page
D-Link	`http://dlinkrouter.local`
TP-Link	`http://tplinkwifi.net`
Netgear	`http://routerlogin.net`
Tenda	`http://tendawifi.com`

Problems typical for 192.168.0.1

The page asks for a password you never set. On TP-Link and Tenda routers that were already configured, the login page wants the password chosen during setup, not admin. If nobody remembers it, only a factory reset helps.
“192.168.0.1.1” or “192.168.o.1”. An extra number or the letter O makes the address invalid. Type exactly four numbers: 192.168.0.1.
A second router behind the first. If you connected a D-Link or TP-Link router to a provider modem that also uses 192.168.0.1, the two clash. Change the LAN address of your own router to, for example, 192.168.2.1, or put the modem in bridge mode.
The page loads but the login fails with admin / admin. D-Link usually expects an empty password field, not “admin”. Try the pairs from the table above one by one.

After you log in

Start with two changes: a new admin password and a new Wi-Fi password. On D-Link routers both live under Management or Tools; on TP-Link they are under System Tools or Advanced → System. Write the new admin password down: after a factory reset the router returns to its default address and password, and the internet settings have to be entered again.

192.168.0.1: frequently asked questions

What is the default password for 192.168.0.1?

It depends on the brand. Classic D-Link routers use admin with an empty password, older TP-Link models use admin / admin, while newer TP-Link and Tenda routers have no default password and ask you to create one at first login. The tables above list the most common pairs for this address.

Why does 192.168.0.1 not open while 192.168.1.1 does?

Your router uses 192.168.1.1, not 192.168.0.1. The two addresses belong to different networks, so open the one shown as the default gateway on your device.

What is 192.168.0.1.1?

It is not a valid address: an IPv4 address has exactly four numbers. Remove the last “.1” and open 192.168.0.1.

Can I log in to 192.168.0.1 from my phone?

Yes. Connect the phone to the router’s Wi-Fi, switch off mobile data if the page does not load, and open http://192.168.0.1 in the browser. TP-Link and Tenda also offer phone apps for the same settings.