10.0.0.1 Login Admin
To access the router admin page, simply enter 10.0.0.1 into your web browser's address bar or click the link below. This will direct you to the login page of your router's control panel.
The IP address displayed here is typically the default address for your router’s admin interface. However, please ensure that you are connected to the same network as the router for this to work correctly. If you are using a different network or have made custom settings, the address may vary.
10.0.0.0.1 is a typo for 10.0.0.1
10.0.0.0.1 is not a valid IP address, so the browser cannot open it. It contains an extra number: an IPv4 address always has exactly four numbers separated by dots. The router you are looking for is at 10.0.0.1.
The mistake usually comes from typing a group twice, for example “0.0” instead of “0”, or from the browser’s autocomplete repeating an earlier wrong entry. Type the address by hand: http://10.0.0.1.
How to log in to 10.0.0.1
- Connect to the router. Join its Wi-Fi network or plug a computer into one of its LAN ports. Mobile data will not work.
- Open the admin page. Type
http://10.0.0.1into the browser’s address bar (not the search box) and press Enter. - Accept the certificate warning if one appears. Routers use self-signed certificates, so “Not secure” on this page is normal inside your own network.
- Enter the username and password. Look at the sticker on the bottom of the router first: many models print a unique password there. The most common factory pair for this address is
admin/password; the full list is in the tables below. - Change the default password in the administration or system section as soon as you are in.
Default logins for IP 10.0.0.1
Who uses 10.0.0.1 by default
Router models in our database with 10.0.0.1 as the default address: 28. Brands: 8.
Brands with the most models on 10.0.0.1
| Brand | Models |
|---|---|
| technicolor | 9 |
| Cisco | 8 |
| SMC | 4 |
| Arris | 2 |
| Intelbras | 2 |
| Aztech | 1 |
| i-connect | 1 |
| RFNet | 1 |
Most common default username and password on 10.0.0.1
| Username | Password | Models |
|---|---|---|
admin |
password |
14 (50%) |
| — | — | 8 (29%) |
admin |
admin |
2 (7%) |
cusadmin |
highspeed |
2 (7%) |
Cisco |
Cisco |
1 (4%) |
highspeed |
cusadmin |
1 (4%) |
“—” means there is no factory value: the field is left empty or a unique password is printed on the router’s label.
Default credentials work only until someone changes them. If none of these pairs fits, the password was changed; a factory reset restores the default.
