D-Link Default Login - Control Panel
Find the default username, password, and IP address for your D-Link router. This guide provides the default login credentials and IP settings for D-Link routers, helping you access the router’s admin page easily and securely.
go to routers models
Default IP adress for D-Link routers
Default logins for D-Link
How D-Link routers log in by default
D-Link router models in our database: 663. Different default IP addresses: 8.
Default IP addresses of D-Link routers
| IP address | Models |
|---|---|
| 192.168.0.1 | 376 (57%) |
| 192.168.1.1 | 35 (5%) |
| 192.168.10.1 | 8 (1%) |
| 192.168.0.10 | 2 (0%) |
| 192.168.0.50 | 2 (0%) |
| 192.168.1.254 | 2 (0%) |
Most common default username and password for D-Link
| Username | Password | Models |
|---|---|---|
| — | — | 392 (59%) |
| — | Admin |
170 (26%) |
admin |
admin |
84 (13%) |
admin |
— | 5 (1%) |
admin |
password |
4 (1%) |
'blank'' |
Admin |
3 (0%) |
“—” means there is no factory value: the field is left empty or a unique password is printed on the router’s label.
Default credentials work only until someone changes them. If none of these pairs fits, the password was changed; a factory reset restores the default.
Updated October 8, 2026
How to log in to a D-Link router
- Connect to the router by Wi-Fi or cable.
- Open dlinkrouter.local (or just
http://dlinkrouter), or the IP address 192.168.0.1. - Sign in as Admin. Which password works depends on when the router was made — see below.
- Set your own password under Management › Admin (or Tools › Admin on older pages).
Username and password by router age
- Routers sold since 2017 are secure by default: the admin password is printed on the label on the bottom, next to the serial number.
- Older DIR routers use the username
Adminwith an empty password — leave the field blank. - DSL modem-routers (DSL-2750U and similar) usually open at 192.168.1.1 with
admin/admin. - Units from an internet provider may use the provider’s own login; it is normally on the label or in the provider’s instructions.
Router page vs mydlink
mydlink is D-Link’s cloud account for apps and cameras. It is not the router’s admin password: signing in at mydlink.com does not open the router’s settings, and resetting the router does not delete the mydlink account.
The page does not open
dlinkrouter.local works only from a device connected to the router. If the name fails, use 192.168.0.1; if that fails too, open your device’s network details and use the “default gateway” address shown there — the router may have been moved to another address, for example 192.168.1.1 or 192.168.10.1.
Forgot the password: factory reset
With the router on, press and hold the Reset button with a paper clip for about 10 seconds (D-Link gives up to 30 seconds for some models) until the lights change, then release. After the restart, log in with the default from the list above and run the setup wizard again.
D-Link: frequently asked questions
What is the default D-Link router password?
On routers made since 2017 it is printed on the label. Older routers use the username Admin with an empty password.
What is the D-Link router IP address?
192.168.0.1 for most routers; DSL modem-routers usually use 192.168.1.1. dlinkrouter.local opens the router page without the number.
Is my mydlink password the router password?
No. mydlink is a cloud account; the router page has its own admin password.
How do I reset a D-Link router?
Hold the Reset button for about 10 seconds with the router on (up to 30 seconds on some models).
