192.168.0.10 Login Admin
To access the router admin page, simply enter 192.168.0.10 into your web browser's address bar or click the link below. This will direct you to the login page of your router's control panel.
The IP address displayed here is typically the default address for your router’s admin interface. However, please ensure that you are connected to the same network as the router for this to work correctly. If you are using a different network or have made custom settings, the address may vary.
How to log in to 192.168.0.10
- Connect to the router. Join its Wi-Fi network or plug a computer into one of its LAN ports. Mobile data will not work.
- Open the admin page. Type
http://192.168.0.10into the browser’s address bar (not the search box) and press Enter. - Accept the certificate warning if one appears. Routers use self-signed certificates, so “Not secure” on this page is normal inside your own network.
- Enter the username and password. Look at the sticker on the bottom of the router first: many models print a unique password there. The most common factory pair for this address is
admin/admin; the full list is in the tables below. - Change the default password in the administration or system section as soon as you are in.
Default logins for IP 192.168.0.10
Who uses 192.168.0.10 by default
Router models in our database with 192.168.0.10 as the default address: 5. Brands: 3.
Brands with the most models on 192.168.0.10
| Brand | Models |
|---|---|
| D-Link | 2 |
| Intel | 2 |
| StarTech | 1 |
Most common default username and password on 192.168.0.10
| Username | Password | Models |
|---|---|---|
| — | — | 2 (40%) |
admin |
admin |
2 (40%) |
admin |
none |
1 (20%) |
“—” means there is no factory value: the field is left empty or a unique password is printed on the router’s label.
Default credentials work only until someone changes them. If none of these pairs fits, the password was changed; a factory reset restores the default.
Updated October 23, 2026 · Source: RFC 1918, Address Allocation for Private Internets
192.168.0.10 is a device address, not a router
192.168.0.10 sits in the same network as routers on 192.168.0.1. It is usually one of two things:
- A device in your network. Low addresses such as .10 are a common pick for devices that need a fixed address: a printer, a NAS, a camera or a second access point. Some routers also hand it out automatically.
- The factory address of a network device. Our database lists five models on 192.168.0.10: two from D-Link, two from Intel and one from StarTech.
Logging in
The factory logins in our database for this address: two models have no username and no password, two use admin / admin, and one uses admin with no password. If the device asks for something else, the password was changed; a factory reset restores the default.
Reaching a new device at 192.168.0.10
If your network is 192.168.0.x, open http://192.168.0.10 from any connected computer. If it uses another range, such as 192.168.1.x:
- Connect a computer to the device with a cable.
- Set the computer manually to
192.168.0.50, mask255.255.255.0. - Open
http://192.168.0.10and change the device’s address to one in your own network, then switch the computer back to automatic.
When 192.168.0.10 does not open
- It is a phone or a computer. Ordinary devices have no admin page. Check your default gateway for the router.
- Two devices share 192.168.0.10. A fixed address inside the router’s DHCP range causes conflicts. Reserve it in the router or move the device outside the range.
192.168.0.10: frequently asked questions
Is 192.168.0.10 a router login address?
Rarely. The router of a 192.168.0.x network is usually at 192.168.0.1; .10 is typically a printer, NAS, camera or access point.
What is the password for 192.168.0.10?
Models in our database use admin / admin, admin with no password, or no login at all.
