192.168.0.50 Login Admin
To access the router admin page, simply enter 192.168.0.50 into your web browser's address bar or click the link below. This will direct you to the login page of your router's control panel.
The IP address displayed here is typically the default address for your router’s admin interface. However, please ensure that you are connected to the same network as the router for this to work correctly. If you are using a different network or have made custom settings, the address may vary.
How to log in to 192.168.0.50
- Connect to the router. Join its Wi-Fi network or plug a computer into one of its LAN ports. Mobile data will not work.
- Open the admin page. Type
http://192.168.0.50into the browser’s address bar (not the search box) and press Enter. - Accept the certificate warning if one appears. Routers use self-signed certificates, so “Not secure” on this page is normal inside your own network.
- Enter the username and password. Look at the sticker on the bottom of the router first: many models print a unique password there.
- Change the default password in the administration or system section as soon as you are in.
Default logins for IP 192.168.0.50
Who uses 192.168.0.50 by default
Router models in our database with 192.168.0.50 as the default address: 2. Brands: 1.
Brands with the most models on 192.168.0.50
| Brand | Models |
|---|---|
| D-Link | 2 |
Most common default username and password on 192.168.0.50
| Username | Password | Models |
|---|---|---|
| — | admin |
1 (50%) |
| — | — | 1 (50%) |
“—” means there is no factory value: the field is left empty or a unique password is printed on the router’s label.
Default credentials work only until someone changes them. If none of these pairs fits, the password was changed; a factory reset restores the default.
Updated October 23, 2026 · Source: D-Link DAP-1350 Quick Install Guide
192.168.0.50: the D-Link pocket router, or a device on your network
192.168.0.50 sits in the same network as routers on 192.168.0.1, so in most homes it is simply an address the router gave to a phone, laptop or TV. As a factory default, our database lists it for the D-Link DAP-1350, a Wireless N pocket router and access point small enough to carry in a bag.
Setting up the DAP-1350
The DAP-1350 has a mode switch on the back: Router, Access Point or Wireless Client. The mode decides how you reach its page:
- Access Point and Client modes. D-Link’s quick install guide tells you to set the computer manually to
192.168.0.51, mask255.255.255.0, connect it to the device and openhttp://192.168.0.50. - Router mode. The guide says to configure the pocket router through its Wi-Fi: the Ethernet port does not let you into the web utility in this mode.
The factory login in our database is the username admin with an empty password on one revision and both fields empty on the other.
When 192.168.0.50 is not a D-Link
- It is a phone, computer or TV. These have no admin page. Check your default gateway to find the router.
- It is a printer, camera or NAS with a fixed address. Open
http://192.168.0.50: the page usually shows the device brand. - Two devices share 192.168.0.50. A fixed address inside the router’s DHCP range causes conflicts. Reserve it in the router or move the device outside the range.
192.168.0.50: frequently asked questions
Which device uses 192.168.0.50 by default?
In our database, the D-Link DAP-1350 pocket router and access point. In most homes it is just an address the router gave to a device.
What is the password for 192.168.0.50?
On the D-Link DAP-1350, admin with an empty password, or no login at all.
Why can I not open the DAP-1350 page with a cable?
In Router mode the Ethernet port does not give access to the web utility. Connect through the device’s Wi-Fi instead.
Brands using 192.168.0.50
