ZTE Default Login - Control Panel
Find the default username, password, and IP address for your ZTE router. This guide provides the default login credentials and IP settings for ZTE routers, helping you access the router’s admin page easily and securely.
go to routers models
Default logins for ZTE
How ZTE routers log in by default
ZTE router models in our database: 17. Different default IP addresses: 2.
Default IP addresses of ZTE routers
| IP address | Models |
|---|---|
| 192.168.1.1 | 3 (18%) |
| 192.168.0.1 | 2 (12%) |
Most common default username and password for ZTE
| Username | Password | Models |
|---|---|---|
| — | — | 11 (65%) |
admin |
admin |
3 (18%) |
1admin0 |
ltecl4r0 |
1 (6%) |
ltecl4r0 |
1admin0 |
1 (6%) |
| — | admin |
1 (6%) |
“—” means there is no factory value: the field is left empty or a unique password is printed on the router’s label.
Default credentials work only until someone changes them. If none of these pairs fits, the password was changed; a factory reset restores the default.
Updated October 23, 2026 · Source: RFC 1918, Address Allocation for Private Internets
ZTE routers usually come from your provider
ZTE makes fiber routers, ONTs, DSL modems and 4G/5G routers that internet providers hand out to their customers. That is why there is no single password: each provider configures its own. Our database lists 17 ZTE models, and for 65% of them there is no common factory pair.
How to log in
- Connect to the router by Wi-Fi or cable.
- Open 192.168.1.1, the usual address of provider ZTE routers. The MF10 mobile modem in our database uses 192.168.0.1.
- Use the password from the label. On provider units it is usually on the bottom or back, separate from the Wi-Fi key.
Older models in our database, such as the ZXDSL 931WII and ZXHN H108N, use admin / admin. Treat that only as a starting point for old units.
A fiber ONT from your provider
If the ZTE is the ONT of your fiber connection, be careful before changing anything. Users on the Spanish forum BandaAncha note, for example, that the provider Digi identifies the connection by the ONT’s serial number, so the unit should not be replaced or reconfigured without talking to the provider. A factory reset can leave you offline until the provider sets the device up again.
When you cannot log in
- The page does not open. Check your default gateway: it is the real address of your ZTE.
- The label password is rejected. The provider or someone at home probably changed it; ask the provider before resetting.
- Your own router is behind it. Connect the computer directly to the ZTE to reach its page.
ZTE: frequently asked questions
What is the ZTE router password?
The one on the device label. Old models used admin / admin.
What is the ZTE router IP address?
Usually 192.168.1.1; the MF10 mobile modem in our database uses 192.168.0.1.
