Wavlink Default Login - Control Panel

Updated October 23, 2026 · Source: Wavlink, Wifi.wavlink.com login

How to log in to a Wavlink router

1. Connect to the Wavlink by Wi-Fi or with a cable to a LAN port. The device does not need internet access for this.
2. Open the IP address printed on the label on the bottom of the device, usually 192.168.10.1.
3. Enter the password admin. Many Wavlink models ask only for a password, without a username.

Our database lists the Wavlink WL-WN527A2 with admin / admin at 192.168.10.1.

wifi.wavlink.com is being phased out

Older Wavlink guides send you to wifi.wavlink.com. Wavlink now says this name is no longer applicable because of compatibility problems and recommends using the device’s IP address instead. On some older products the name still works, since they were never updated. Extenders and outdoor access points may use other setup names or addresses; check the label and the quick guide of your device.

When the page does not open

• The device already has another address. In extender or access point mode it gets one from your main router. Wavlink suggests looking it up in the main router’s DHCP client list or with arp -a in the command prompt.
• The browser keeps an old page. Try another browser or clear the cache, as Wavlink’s troubleshooting suggests.
• The password was changed and forgotten. A hard reset with the Reset button returns it to admin and erases your settings.

Wavlink: frequently asked questions

What is the Wavlink default password?

admin. Many models ask only for the password, without a username.

What is the Wavlink router IP address?

The address on the device label, usually 192.168.10.1.

Why does wifi.wavlink.com not work?

Wavlink says the name is no longer applicable on current products. Use the IP address from the label instead.