192.168.88.1 Login Admin
To access the router admin page, simply enter 192.168.88.1 into your web browser's address bar or click the link below. This will direct you to the login page of your router's control panel.
The IP address displayed here is typically the default address for your router’s admin interface. However, please ensure that you are connected to the same network as the router for this to work correctly. If you are using a different network or have made custom settings, the address may vary.
How to log in to 192.168.88.1
- Connect to the router. Join its Wi-Fi network or plug a computer into one of its LAN ports. Mobile data will not work.
- Open the admin page. Type
http://192.168.88.1into the browser’s address bar (not the search box) and press Enter. - Accept the certificate warning if one appears. Routers use self-signed certificates, so “Not secure” on this page is normal inside your own network.
- Enter the username and password. Look at the sticker on the bottom of the router first: many models print a unique password there. The most common factory pair for this address is
admin/password; the full list is in the tables below. - Change the default password in the administration or system section as soon as you are in.
Default logins for IP 192.168.88.1
Who uses 192.168.88.1 by default
Router models in our database with 192.168.88.1 as the default address: 13. Brands: 2.
Brands with the most models on 192.168.88.1
| Brand | Models |
|---|---|
| MikroTik | 12 |
| Netduma | 1 |
Most common default username and password on 192.168.88.1
| Username | Password | Models |
|---|---|---|
| — | admin |
8 (62%) |
| — | — | 4 (31%) |
admin |
password |
1 (8%) |
“—” means there is no factory value: the field is left empty or a unique password is printed on the router’s label.
Default credentials work only until someone changes them. If none of these pairs fits, the password was changed; a factory reset restores the default.
Updated October 7, 2026 · Source: RFC 1918, Address Allocation for Private Internets
192.168.88.1 is the MikroTik default
192.168.88.1 is the LAN address in the default configuration of MikroTik home and small-office devices such as the hAP and hEX series. Devices behind them get addresses from 192.168.88.0/24. Netduma gaming routers use the same address.
Three ways into a MikroTik
- WebFig in the browser: open
http://192.168.88.1. - WinBox, MikroTik’s desktop tool. It can connect by MAC address, which helps when the IP configuration is broken.
- The MikroTik mobile app for basic settings.
The username is admin. Older devices had an empty password. Devices made in recent years have a unique password printed on the sticker, and RouterOS asks you to change it on the first login.
Problems typical for 192.168.88.1
- The page does not answer after you changed the configuration. Connect with WinBox by MAC address in the Neighbors tab and fix the IP settings from there.
- The device has no default configuration. Some MikroTik models, mainly switches and outdoor devices, start without the 192.168.88.1 setup. Use WinBox by MAC address or check the address on the label.
- You need to start over. Holding the reset button while powering on restores the default configuration; the exact LED sequence differs by model, so follow the manual for yours.
192.168.88.1: frequently asked questions
What is the default login for 192.168.88.1?
The username is admin. Older MikroTik devices have an empty password; newer ones have a unique password printed on the sticker.
What is WebFig?
WebFig is the browser interface of MikroTik RouterOS. It opens at http://192.168.88.1 on a device with the default configuration.
Can I change the 192.168.88.1 address?
Yes, under IP → Addresses, and the DHCP server pool has to be changed to match. Do it from a cable connection and reconnect afterwards.
