192.168.200.1 Login Admin
To access the router admin page, simply enter 192.168.200.1 into your web browser's address bar or click the link below. This will direct you to the login page of your router's control panel.
The IP address displayed here is typically the default address for your router’s admin interface. However, please ensure that you are connected to the same network as the router for this to work correctly. If you are using a different network or have made custom settings, the address may vary.
How to log in to 192.168.200.1
- Connect to the router. Join its Wi-Fi network or plug a computer into one of its LAN ports. Mobile data will not work.
- Open the admin page. Type
http://192.168.200.1into the browser’s address bar (not the search box) and press Enter. - Accept the certificate warning if one appears. Routers use self-signed certificates, so “Not secure” on this page is normal inside your own network.
- Enter the username and password. Look at the sticker on the bottom of the router first: many models print a unique password there. The most common factory pair for this address is
admin/password; the full list is in the tables below. - Change the default password in the administration or system section as soon as you are in.
Default logins for IP 192.168.200.1
Who uses 192.168.200.1 by default
Router models in our database with 192.168.200.1 as the default address: 7. Brands: 4.
Brands with the most models on 192.168.200.1
| Brand | Models |
|---|---|
| Westell | 3 |
| Bitmain | 2 |
| MQmaker | 1 |
| ZyXEL | 1 |
Most common default username and password on 192.168.200.1
| Username | Password | Models |
|---|---|---|
admin |
password |
3 (43%) |
root |
root |
2 (29%) |
| — | — | 1 (14%) |
| — | admin |
1 (14%) |
“—” means there is no factory value: the field is left empty or a unique password is printed on the router’s label.
Default credentials work only until someone changes them. If none of these pairs fits, the password was changed; a factory reset restores the default.
Updated October 23, 2026 · Source: RFC 1918, Address Allocation for Private Internets
Who uses 192.168.200.1
192.168.200.1 is the gateway of the private 192.168.200.0/24 network. Our database lists seven models from four brands on it, a mixed group:
- Westell 7501 (VersaLink) — DSL modem-routers from the Verizon DSL era, with
admin/password. Verizon community posts about the related 7500 point to 192.168.1.1, so try both addresses. - Bitmain AntRouter R1-LTC and R3-LTC — routers with a built-in cryptocurrency miner, with
root/root. - MQmaker WiTi Board, a development board, and the ZyXEL EMG3415-B10A gateway, which uses an empty username with the password
admin.
How to log in
- Connect to the device by Wi-Fi or cable.
- Open
http://192.168.200.1. - Use the pair for your brand from the list above or the tables on this page.
A provider modem such as the Westell may have a password set by the provider. After a reset, a Verizon forum reply notes that the Westell returns to admin / password and asks you to change it.
When 192.168.200.1 does not open
- Your router is at another address. Check your default gateway.
- Your own router is behind the modem. Connect a computer directly to the modem to reach its page.
- The network was set up by hand. On other routers, 192.168.200.1 is often a custom choice; ask whoever configured it.
192.168.200.1: frequently asked questions
Which router uses 192.168.200.1?
In our database, Westell 7501 DSL modems, Bitmain AntRouter units, the MQmaker WiTi Board and the ZyXEL EMG3415-B10A.
What is the password for 192.168.200.1?
admin / password on Westell, root / root on Bitmain AntRouter, admin with an empty username on the ZyXEL EMG3415.
