192.168.2.2 Login Admin
To access the router admin page, simply enter 192.168.2.2 into your web browser's address bar or click the link below. This will direct you to the login page of your router's control panel.
The IP address displayed here is typically the default address for your router’s admin interface. However, please ensure that you are connected to the same network as the router for this to work correctly. If you are using a different network or have made custom settings, the address may vary.
How to log in to 192.168.2.2
- Connect to the router. Join its Wi-Fi network or plug a computer into one of its LAN ports. Mobile data will not work.
- Open the admin page. Type
http://192.168.2.2into the browser’s address bar (not the search box) and press Enter. - Accept the certificate warning if one appears. Routers use self-signed certificates, so “Not secure” on this page is normal inside your own network.
- Enter the username and password. Look at the sticker on the bottom of the router first: many models print a unique password there. The most common factory pair for this address is
admin/1234; the full list is in the tables below. - Change the default password in the administration or system section as soon as you are in.
Default logins for IP 192.168.2.2
Who uses 192.168.2.2 by default
Router models in our database with 192.168.2.2 as the default address: 1. Brands: 1.
Brands with the most models on 192.168.2.2
| Brand | Models |
|---|---|
| Edimax | 1 |
Most common default username and password on 192.168.2.2
| Username | Password | Models |
|---|---|---|
admin |
1234 |
1 (100%) |
“—” means there is no factory value: the field is left empty or a unique password is printed on the router’s label.
Default credentials work only until someone changes them. If none of these pairs fits, the password was changed; a factory reset restores the default.
Updated October 23, 2026 · Source: RFC 1918, Address Allocation for Private Internets
192.168.2.2: an Edimax print server or a device behind 192.168.2.1
192.168.2.2 is the address right after 192.168.2.1, the gateway of Belkin, Edimax and many second routers. That gives it two typical roles:
- A device on your network. A router at 192.168.2.1 often gives 192.168.2.2 to the first device that connects. If your computer shows this address, the router is almost certainly at 192.168.2.1.
- An Edimax print server. Our database lists the PS-1208UWg / PS-1208MFg on 192.168.2.2 with the login
admin/1234. Other Edimax print servers are reported at the same address.
Reaching an Edimax print server
According to user reports, Edimax print servers may ship with DHCP turned off, so the server keeps 192.168.2.2 even in a network that uses other addresses. To reach it:
- Connect a computer to the print server with a cable.
- Set the computer manually to
192.168.2.10, mask255.255.255.0. - Open
http://192.168.2.2and sign in withadmin/1234. - Give the print server an address in your own network, or turn on DHCP, then switch the computer back to automatic.
When 192.168.2.2 does not open
- It is a computer or phone. These have no admin page; open 192.168.2.1 for the router.
- Two devices share the address. A print server with a fixed 192.168.2.2 behind a router that hands out .2 causes conflicts. Move the print server outside the router’s DHCP range.
- Your network is not 192.168.2.x. Check your default gateway.
192.168.2.2: frequently asked questions
What uses 192.168.2.2?
Usually a device behind a router at 192.168.2.1, or an Edimax print server, which uses this address by default.
What is the password for 192.168.2.2?
For the Edimax PS-1208 print servers in our database, admin / 1234.
My computer has the IP 192.168.2.2. Where is my router?
Almost always at 192.168.2.1. Check the default gateway in your network settings to be sure.
Brands using 192.168.2.2
