192.168.168.168 Login Admin
To access the router admin page, simply enter 192.168.168.168 into your web browser's address bar or click the link below. This will direct you to the login page of your router's control panel.
The IP address displayed here is typically the default address for your router’s admin interface. However, please ensure that you are connected to the same network as the router for this to work correctly. If you are using a different network or have made custom settings, the address may vary.
How to log in to 192.168.168.168
- Connect to the router. Join its Wi-Fi network or plug a computer into one of its LAN ports. Mobile data will not work.
- Open the admin page. Type
http://192.168.168.168into the browser’s address bar (not the search box) and press Enter. - Accept the certificate warning if one appears. Routers use self-signed certificates, so “Not secure” on this page is normal inside your own network.
- Enter the username and password. Look at the sticker on the bottom of the router first: many models print a unique password there. The most common factory pair for this address is
admin/password; the full list is in the tables below. - Change the default password in the administration or system section as soon as you are in.
Default logins for IP 192.168.168.168
Who uses 192.168.168.168 by default
Router models in our database with 192.168.168.168 as the default address: 9. Brands: 1.
Brands with the most models on 192.168.168.168
| Brand | Models |
|---|---|
| SonicWALL | 9 |
Most common default username and password on 192.168.168.168
| Username | Password | Models |
|---|---|---|
admin |
password |
9 (100%) |
“—” means there is no factory value: the field is left empty or a unique password is printed on the router’s label.
Default credentials work only until someone changes them. If none of these pairs fits, the password was changed; a factory reset restores the default.
Updated October 7, 2026 · Source: RFC 1918, Address Allocation for Private Internets
192.168.168.168 is a SonicWall firewall
192.168.168.168 is the factory management address of SonicWall firewalls, used on the LAN interface (X0 on most models). It is a business device rather than a home router, so the admin page is usually opened by whoever manages the office network.
Logging in to a SonicWall
- Connect a computer to the X0 port. If the firewall does not hand out an address, give the computer a fixed one in the same network, for example 192.168.168.20 with mask 255.255.255.0.
- Open
https://192.168.168.168. Management normally runs over HTTPS, so accept the self-signed certificate warning. - Log in with the factory credentials
admin/password, then change the password as the setup wizard asks.
When 192.168.168.168 does not open
- The firewall was already configured. Administrators usually move the LAN to the office address plan; check your default gateway.
- Management is limited to certain interfaces or addresses. Connect from the network where management is allowed, usually X0.
- Only plain HTTP was tried. Use https:// explicitly.
192.168.168.168: frequently asked questions
What is the default password for 192.168.168.168?
SonicWall firewalls ship with admin / password. The setup wizard asks you to change it.
Why does 192.168.168.168 not load over HTTP?
SonicWall management is normally served over HTTPS. Open https://192.168.168.168 and accept the certificate warning.
Brands using 192.168.168.168
