192.168.1.252 Login Admin
To access the router admin page, simply enter 192.168.1.252 into your web browser's address bar or click the link below. This will direct you to the login page of your router's control panel.
The IP address displayed here is typically the default address for your router’s admin interface. However, please ensure that you are connected to the same network as the router for this to work correctly. If you are using a different network or have made custom settings, the address may vary.
How to log in to 192.168.1.252
- Connect to the router. Join its Wi-Fi network or plug a computer into one of its LAN ports. Mobile data will not work.
- Open the admin page. Type
http://192.168.1.252into the browser’s address bar (not the search box) and press Enter. - Accept the certificate warning if one appears. Routers use self-signed certificates, so “Not secure” on this page is normal inside your own network.
- Enter the username and password. Look at the sticker on the bottom of the router first: many models print a unique password there.
- Change the default password in the administration or system section as soon as you are in.
Default logins for IP 192.168.1.252
Who uses 192.168.1.252 by default
Router models in our database with 192.168.1.252 as the default address: 1. Brands: 1.
Brands with the most models on 192.168.1.252
| Brand | Models |
|---|---|
| IOGear | 1 |
Most common default username and password on 192.168.1.252
| Username | Password | Models |
|---|---|---|
| — | — | 1 (100%) |
“—” means there is no factory value: the field is left empty or a unique password is printed on the router’s label.
Default credentials work only until someone changes them. If none of these pairs fits, the password was changed; a factory reset restores the default.
Updated October 23, 2026 · Source: RFC 1918, Address Allocation for Private Internets
192.168.1.252: a fixed address for an extra device
192.168.1.252 is near the top of the 192.168.1.0/24 network. Routers at 192.168.1.1 rarely hand out addresses this high, which makes .252 a common spot for devices that keep a fixed address: access points, extenders, wireless adapters, printers or cameras. Our database lists one model with 192.168.1.252 as its factory address, the IOGear GWU647, with no default username or password.
How to find out what is at 192.168.1.252
- Open
http://192.168.1.252while connected to the 192.168.1.x network. The page usually shows the brand or model. - Check the router’s device list. It shows the name and maker of the device on that address.
- If nothing answers, the address may be free, or the device does not run a web page.
Setting up a new device on 192.168.1.252
If a new device arrived set to 192.168.1.252 and your network uses another range, connect it to a computer with a cable, set the computer to 192.168.1.100 with mask 255.255.255.0, and open the address. Then give the device an address in your own network and switch the computer back to automatic.
Conflicts
If your router’s DHCP range reaches .252, a device with that fixed address and another device can end up with the same IP, and one of them drops off. Narrow the router’s DHCP range or reserve the address. To find the router itself, check your default gateway.
192.168.1.252: frequently asked questions
Is 192.168.1.252 a router address?
Rarely. It is usually a device with a fixed address; our database lists the IOGear GWU647 on it.
What is the password for 192.168.1.252?
The IOGear GWU647 has no factory password. For other devices, see the label or the brand’s page.
Brands using 192.168.1.252
