192.168.1.230 Login Admin
To access the router admin page, simply enter 192.168.1.230 into your web browser's address bar or click the link below. This will direct you to the login page of your router's control panel.
The IP address displayed here is typically the default address for your router’s admin interface. However, please ensure that you are connected to the same network as the router for this to work correctly. If you are using a different network or have made custom settings, the address may vary.
How to log in to 192.168.1.230
- Connect to the router. Join its Wi-Fi network or plug a computer into one of its LAN ports. Mobile data will not work.
- Open the admin page. Type
http://192.168.1.230into the browser’s address bar (not the search box) and press Enter. - Accept the certificate warning if one appears. Routers use self-signed certificates, so “Not secure” on this page is normal inside your own network.
- Enter the username and password. Look at the sticker on the bottom of the router first: many models print a unique password there.
- Change the default password in the administration or system section as soon as you are in.
Default logins for IP 192.168.1.230
Who uses 192.168.1.230 by default
Router models in our database with 192.168.1.230 as the default address: 1. Brands: 1.
Brands with the most models on 192.168.1.230
| Brand | Models |
|---|---|
| Corega | 1 |
Most common default username and password on 192.168.1.230
| Username | Password | Models |
|---|---|---|
| — | root |
1 (100%) |
“—” means there is no factory value: the field is left empty or a unique password is printed on the router’s label.
Default credentials work only until someone changes them. If none of these pairs fits, the password was changed; a factory reset restores the default.
Updated October 23, 2026 · Source: RFC 1918, Address Allocation for Private Internets
192.168.1.230: a Corega access point or a fixed device address
192.168.1.230 belongs to the 192.168.1.0/24 network, the same as routers on 192.168.1.1. As a factory default it is rare: our database lists one model, the Corega CG-WLAPGMH access point. Corega is a Japanese brand, and its routers in our database sit at 192.168.1.1, so the access point at .230 can run next to them. Its login is an empty username with the password root.
In most networks 192.168.1.230 is simply a fixed address someone gave to a printer, camera, NAS or access point, chosen high so the router never hands it to another device.
How to reach a device at 192.168.1.230
- On a 192.168.1.x network, just open
http://192.168.1.230. The page usually names the device. - On another network, connect the device to a computer by cable and set the computer to
192.168.1.100, mask255.255.255.0. - After setup, switch the computer back to automatic.
When 192.168.1.230 does not open
- No device uses the address, or the device has no web page. The router’s device list shows what is connected.
- The password is rejected. It was changed; a factory reset restores the default.
- You need the router. Check your default gateway.
192.168.1.230: frequently asked questions
What uses 192.168.1.230 by default?
In our database, the Corega CG-WLAPGMH access point. Otherwise it is usually a fixed address set by hand.
What is the password for 192.168.1.230?
On the Corega access point, an empty username and the password root.
Brands using 192.168.1.230
