192.168.1.2 Login Admin
To access the router admin page, simply enter 192.168.1.2 into your web browser's address bar or click the link below. This will direct you to the login page of your router's control panel.
The IP address displayed here is typically the default address for your router’s admin interface. However, please ensure that you are connected to the same network as the router for this to work correctly. If you are using a different network or have made custom settings, the address may vary.
How to log in to 192.168.1.2
- Connect to the router. Join its Wi-Fi network or plug a computer into one of its LAN ports. Mobile data will not work.
- Open the admin page. Type
http://192.168.1.2into the browser’s address bar (not the search box) and press Enter. - Accept the certificate warning if one appears. Routers use self-signed certificates, so “Not secure” on this page is normal inside your own network.
- Enter the username and password. Look at the sticker on the bottom of the router first: many models print a unique password there. The most common factory pair for this address is
admin/admin; the full list is in the tables below. - Change the default password in the administration or system section as soon as you are in.
Default logins for IP 192.168.1.2
Who uses 192.168.1.2 by default
Router models in our database with 192.168.1.2 as the default address: 5. Brands: 3.
Brands with the most models on 192.168.1.2
| Brand | Models |
|---|---|
| EnGenius | 2 |
| Fortinet | 2 |
| Rosewill | 1 |
Most common default username and password on 192.168.1.2
| Username | Password | Models |
|---|---|---|
| — | — | 2 (40%) |
| — | admin |
2 (40%) |
admin |
admin |
1 (20%) |
“—” means there is no factory value: the field is left empty or a unique password is printed on the router’s label.
Default credentials work only until someone changes them. If none of these pairs fits, the password was changed; a factory reset restores the default.
Updated October 23, 2026 · Source: RFC 1918, Address Allocation for Private Internets
192.168.1.2 is usually the second device on the network
192.168.1.2 is the address right after 192.168.1.1 in the private 192.168.1.0/24 network. That makes it one of two things:
- A device on your network. Routers at 192.168.1.1 whose address pool starts at .2 give 192.168.1.2 to the first device that connects — often your computer, phone or console. If a device shows this address, the router itself is almost always at 192.168.1.1.
- The factory address of an access point or network appliance. Our database lists five models from three brands on 192.168.1.2: EnGenius and Fortinet with two models each, and one from Rosewill. Placing such a device at .2 lets it sit next to a main router at .1 without a clash.
Logging in to a device at 192.168.1.2
The factory logins in our database for this address are mostly empty: two models have no username and no password, two use an empty username with the password admin, and one uses admin / admin. Where the field is empty, the device usually asks you to create a password on the first visit. If nothing works, the password was changed and a factory reset restores the default.
When 192.168.1.2 does not open
- It is a computer or phone, not a router. Ordinary devices have no admin page. Check your default gateway and open that address instead.
- Two devices share 192.168.1.2. An access point with a fixed .2 in a network where the router also hands out .2 causes a conflict and dropouts. Move the access point outside the router’s DHCP range, for example to 192.168.1.250, or reserve the address in the router.
- The access point does not give out addresses. Connected to it by cable alone, a computer gets no address. Set the computer manually to 192.168.1.10 with mask 255.255.255.0 for the setup, then switch back to automatic.
192.168.1.2: frequently asked questions
Is 192.168.1.2 a router login address?
Rarely. It is usually an address the router at 192.168.1.1 gave to a device, or the factory address of an access point such as some EnGenius models.
What is the password for 192.168.1.2?
Most models on this address in our database have no factory password or use admin; the tables above list the exact pairs.
My computer has the IP 192.168.1.2. Where is my router?
Almost always at 192.168.1.1. Check the default gateway in your network settings to be sure.
