192.168.0.254 Login Admin
To access the router admin page, simply enter 192.168.0.254 into your web browser's address bar or click the link below. This will direct you to the login page of your router's control panel.
The IP address displayed here is typically the default address for your router’s admin interface. However, please ensure that you are connected to the same network as the router for this to work correctly. If you are using a different network or have made custom settings, the address may vary.
How to log in to 192.168.0.254
- Connect to the router. Join its Wi-Fi network or plug a computer into one of its LAN ports. Mobile data will not work.
- Open the admin page. Type
http://192.168.0.254into the browser’s address bar (not the search box) and press Enter. - Accept the certificate warning if one appears. Routers use self-signed certificates, so “Not secure” on this page is normal inside your own network.
- Enter the username and password. Look at the sticker on the bottom of the router first: many models print a unique password there. The most common factory pair for this address is
admin/admin; the full list is in the tables below. - Change the default password in the administration or system section as soon as you are in.
Default logins for IP 192.168.0.254
Who uses 192.168.0.254 by default
Router models in our database with 192.168.0.254 as the default address: 11. Brands: 2.
Brands with the most models on 192.168.0.254
| Brand | Models |
|---|---|
| TP-LINK | 8 |
| Intel | 3 |
Most common default username and password on 192.168.0.254
| Username | Password | Models |
|---|---|---|
admin |
admin |
11 (100%) |
“—” means there is no factory value: the field is left empty or a unique password is printed on the router’s label.
Default credentials work only until someone changes them. If none of these pairs fits, the password was changed; a factory reset restores the default.
Updated October 7, 2026 · Source: RFC 1918, Address Allocation for Private Internets
192.168.0.254: access points rather than routers
192.168.0.254 is the last usable address of the 192.168.0.0/24 network. In our database it belongs mostly to TP-Link devices, typically older access points from the TL-WA series, which traditionally use admin / admin. Placing an access point at .254 keeps it out of the way of a main router at 192.168.0.1.
How to reach a device that does not give out addresses
An access point does not run its own DHCP server, so a computer plugged straight into it gets no address and cannot open 192.168.0.254. Give the computer a fixed address in the same network for the duration of the setup:
- In the network adapter settings, set IPv4 manually: address
192.168.0.100, mask255.255.255.0. - Connect the computer to the access point with a cable and open
http://192.168.0.254. - After configuring, switch the adapter back to “obtain an address automatically”.
If the access point is already connected to your main router, it may have received a different address from it. Look it up in the main router’s list of connected devices.
192.168.0.254: frequently asked questions
What is the default password for 192.168.0.254?
Older TP-Link access points use admin / admin. The tables above list the pairs most common for this address in our database.
Why can I not open 192.168.0.254 with a cable connected?
The access point does not assign addresses. Give your computer a fixed address such as 192.168.0.100 with mask 255.255.255.0 and try again.
