192.168.0.100 Login Admin
To access the router admin page, simply enter 192.168.0.100 into your web browser's address bar or click the link below. This will direct you to the login page of your router's control panel.
The IP address displayed here is typically the default address for your router’s admin interface. However, please ensure that you are connected to the same network as the router for this to work correctly. If you are using a different network or have made custom settings, the address may vary.
How to log in to 192.168.0.100
- Connect to the router. Join its Wi-Fi network or plug a computer into one of its LAN ports. Mobile data will not work.
- Open the admin page. Type
http://192.168.0.100into the browser’s address bar (not the search box) and press Enter. - Accept the certificate warning if one appears. Routers use self-signed certificates, so “Not secure” on this page is normal inside your own network.
- Enter the username and password. Look at the sticker on the bottom of the router first: many models print a unique password there. The most common factory pair for this address is
admin/password; the full list is in the tables below. - Change the default password in the administration or system section as soon as you are in.
Default logins for IP 192.168.0.100
Who uses 192.168.0.100 by default
Router models in our database with 192.168.0.100 as the default address: 6. Brands: 3.
Brands with the most models on 192.168.0.100
| Brand | Models |
|---|---|
| Netgear | 3 |
| SerComm | 2 |
| USRobotics | 1 |
Most common default username and password on 192.168.0.100
| Username | Password | Models |
|---|---|---|
admin |
password |
3 (50%) |
| — | — | 3 (50%) |
“—” means there is no factory value: the field is left empty or a unique password is printed on the router’s label.
Default credentials work only until someone changes them. If none of these pairs fits, the password was changed; a factory reset restores the default.
Updated October 8, 2026 · Source: RFC 1918, Address Allocation for Private Internets
192.168.0.100 is usually not your router
192.168.0.100 is a private address in the 192.168.0.0/24 network, the same network as routers on 192.168.0.1. People usually meet it in one of two situations:
- It is the address of your own computer or phone. Many routers, including TP-Link models, start handing out addresses at 192.168.0.100. If your device shows this as its IP address, the router itself is almost always at 192.168.0.1.
- It is the factory address of an access point or a print server. In our database it is the default of Netgear business access points (WN604, WNDAP360, WAC124), with the login
admin/password, and of SerComm and USRobotics print servers.
Opening a new access point at 192.168.0.100
An access point fresh from the box keeps 192.168.0.100 until you change it. If your home network uses 192.168.0.x, open http://192.168.0.100 from any connected computer. If it uses another range, such as 192.168.1.x:
- Connect a computer to the access point with a cable and disconnect Wi-Fi.
- Give the computer a manual address:
192.168.0.50, mask255.255.255.0. - Open
http://192.168.0.100and log in with the default pair from the tables above. - Set the access point to a free address in your own network, or to obtain one automatically, then switch the computer back to automatic.
Two devices on 192.168.0.100
If an access point with the fixed address 192.168.0.100 joins a network where the router also hands out that address, two devices end up on the same IP and one of them drops off. Give the access point an address outside the router’s DHCP range, for example 192.168.0.250.
192.168.0.100: frequently asked questions
Is 192.168.0.100 a router login address?
Rarely. It is usually an address the router gave to a device, or the factory address of an access point or print server. The router itself is normally at 192.168.0.1.
What is the password for 192.168.0.100?
Netgear access points use admin / password. Print servers on this address often have no password; check the tables above.
My computer has the IP 192.168.0.100. Where is my router?
Almost always at 192.168.0.1. Check the default gateway in your network settings to be sure.
Brands using 192.168.0.100
