10.10.10.254 Login Admin
To access the router admin page, simply enter 10.10.10.254 into your web browser's address bar or click the link below. This will direct you to the login page of your router's control panel.
The IP address displayed here is typically the default address for your router’s admin interface. However, please ensure that you are connected to the same network as the router for this to work correctly. If you are using a different network or have made custom settings, the address may vary.
How to log in to 10.10.10.254
- Connect to the router. Join its Wi-Fi network or plug a computer into one of its LAN ports. Mobile data will not work.
- Open the admin page. Type
http://10.10.10.254into the browser’s address bar (not the search box) and press Enter. - Accept the certificate warning if one appears. Routers use self-signed certificates, so “Not secure” on this page is normal inside your own network.
- Enter the username and password. Look at the sticker on the bottom of the router first: many models print a unique password there. The most common factory pair for this address is
admin/admin; the full list is in the tables below. - Change the default password in the administration or system section as soon as you are in.
Default logins for IP 10.10.10.254
Who uses 10.10.10.254 by default
Router models in our database with 10.10.10.254 as the default address: 21. Brands: 6.
Brands with the most models on 10.10.10.254
| Brand | Models |
|---|---|
| HooToo | 8 |
| Securifi | 8 |
| AboCom | 2 |
| ARGtek | 1 |
| Aukey | 1 |
| j5 Create | 1 |
Most common default username and password on 10.10.10.254
| Username | Password | Models |
|---|---|---|
admin |
admin |
9 (43%) |
| — | — | 7 (33%) |
| — | admin |
4 (19%) |
'blank'' |
admin |
1 (5%) |
“—” means there is no factory value: the field is left empty or a unique password is printed on the router’s label.
Default credentials work only until someone changes them. If none of these pairs fits, the password was changed; a factory reset restores the default.
Updated October 23, 2026 · Source: RFC 1918, Address Allocation for Private Internets
10.10.10.254: travel routers and small gadgets
10.10.10.254 is a private address in the 10.0.0.0/8 block. In our database it is the factory address of 21 models from six brands, and most of them are small devices rather than home routers:
- HooToo (8 models): TripMate travel routers and wireless file hubs that share a USB drive or SD card over Wi-Fi.
- Securifi (8 models): Almond routers.
- AboCom (2), ARGtek, Aukey and j5 Create (1 each).
Username and password
The factory logins vary. In our database, nine models use admin / admin, seven have no username and no password, and five use an empty username with the password admin. On HooToo TripMate devices, try an empty password first, then admin. If neither works, the password was changed; a reset with the small button on the device restores the default.
How to log in
- Connect to the device’s own Wi-Fi network or plug into its Ethernet port.
- Turn off mobile data on a phone: it may otherwise leave a Wi-Fi network without internet.
- Open
http://10.10.10.254and sign in.
When 10.10.10.254 does not open
- You are connected to another network, such as the hotel Wi-Fi instead of the travel router.
- The travel router’s network matches the hotel’s. If the upstream Wi-Fi also uses 10.10.10.x, the two clash. Change the travel router’s address in its settings.
- You are looking for your home router. Check your default gateway.
10.10.10.254: frequently asked questions
What uses 10.10.10.254?
Mostly HooToo TripMate travel routers and file hubs and Securifi Almond routers, plus a few AboCom, ARGtek, Aukey and j5 Create devices.
What is the password for 10.10.10.254?
Usually admin / admin, an empty password, or an empty username with admin. The tables above show how often each pair occurs.
