10.0.0.2 Login Admin

To access the router admin page, simply enter 10.0.0.2 into your web browser's address bar or click the link below. This will direct you to the login page of your router's control panel.

The IP address displayed here is typically the default address for your router’s admin interface. However, please ensure that you are connected to the same network as the router for this to work correctly. If you are using a different network or have made custom settings, the address may vary.

How to log in to 10.0.0.2

Connect to the router. Join its Wi-Fi network or plug a computer into one of its LAN ports. Mobile data will not work.
Open the admin page. Type http://10.0.0.2 into the browser’s address bar (not the search box) and press Enter.
Accept the certificate warning if one appears. Routers use self-signed certificates, so “Not secure” on this page is normal inside your own network.
Enter the username and password. Look at the sticker on the bottom of the router first: many models print a unique password there. The most common factory pair for this address is admin / admin; the full list is in the tables below.
Change the default password in the administration or system section as soon as you are in.

Default logins for IP 10.0.0.2

IP Address:10.0.0.2 Username:admin Password:admin

38%

IP Address:10.0.0.2 Username:admin Password:zoomadsl

25%

IP Address:10.0.0.2 Username:zoomadsl Password:admin

25%

IP Address:10.0.0.2 Username:admin Password:epicrouter

13%

IP Address:10.0.0.2 Username:admin Password:password

Who uses 10.0.0.2 by default

Router models in our database with 10.0.0.2 as the default address: 8. Brands: 5.

Brands with the most models on 10.0.0.2

Brand	Models
Zoom	4
BEC Technologies	1
Gemtek	1
JAHT	1
TRENDnet	1

Most common default username and password on 10.0.0.2

Username	Password	Models
`admin`	`admin`	3 (38%)
`zoomadsl`	`admin`	2 (25%)
`admin`	`zoomadsl`	2 (25%)
`admin`	`epicrouter`	1 (13%)

“—” means there is no factory value: the field is left empty or a unique password is printed on the router’s label.

Default credentials work only until someone changes them. If none of these pairs fits, the password was changed; a factory reset restores the default.

Updated October 23, 2026 · Source: RFC 1918, Address Allocation for Private Internets

10.0.0.2 is usually a device, not the router

10.0.0.2 is a private address in the 10.0.0.0/8 block reserved for local networks. Most people see it in one of two situations:

It is the address of your own computer, phone or console. On networks whose router sits at 10.0.0.1, the first device often receives 10.0.0.2. Xfinity users, for example, report that their gateways hand out addresses from 10.0.0.2 up to 10.0.0.253. If your device shows 10.0.0.2, the router is almost always at 10.0.0.1.
It is the factory address of an older DSL modem-router. Our database lists eight models from five brands with 10.0.0.2 as the default, most of them from Zoom, plus models from BEC Technologies, Gemtek, JAHT and TRENDnet.

Devices on your network get addresses like ⁦10.0.0.x⁩ and reach the internet through the router at ⁦10.0.0.1⁩. The address works only inside this network.

Logging in to a modem at 10.0.0.2

Zoom DSL modems are the main group here. The pairs in our database for them are admin / zoomadsl and the reverse, zoomadsl / admin; other models on this address use admin / admin. The tables above show how often each pair occurs. If none works, the password was changed and only a factory reset restores the default.

When 10.0.0.2 does not open

It is not a router on your network. Check your default gateway; if it is 10.0.0.1, open that address instead.
Two devices share 10.0.0.2. A modem with a fixed 10.0.0.2 behind a router that also hands out that address causes a conflict and dropouts. Give the modem an address outside the router’s DHCP range, or put it in bridge mode.
The modem is behind your router. Connect a computer directly to the modem with a cable to reach its page.