10.0.0.138 Login Admin
To access the router admin page, simply enter 10.0.0.138 into your web browser's address bar or click the link below. This will direct you to the login page of your router's control panel.
The IP address displayed here is typically the default address for your router’s admin interface. However, please ensure that you are connected to the same network as the router for this to work correctly. If you are using a different network or have made custom settings, the address may vary.
How to log in to 10.0.0.138
- Connect to the router. Join its Wi-Fi network or plug a computer into one of its LAN ports. Mobile data will not work.
- Open the admin page. Type
http://10.0.0.138into the browser’s address bar (not the search box) and press Enter. - Accept the certificate warning if one appears. Routers use self-signed certificates, so “Not secure” on this page is normal inside your own network.
- Enter the username and password. Look at the sticker on the bottom of the router first: many models print a unique password there. The most common factory pair for this address is
admin/admin; the full list is in the tables below. - Change the default password in the administration or system section as soon as you are in.
Default logins for IP 10.0.0.138
Who uses 10.0.0.138 by default
Router models in our database with 10.0.0.138 as the default address: 1. Brands: 1.
Brands with the most models on 10.0.0.138
| Brand | Models |
|---|---|
| Netgear | 1 |
Most common default username and password on 10.0.0.138
| Username | Password | Models |
|---|---|---|
admin |
admin |
1 (100%) |
“—” means there is no factory value: the field is left empty or a unique password is printed on the router’s label.
Default credentials work only until someone changes them. If none of these pairs fits, the password was changed; a factory reset restores the default.
Updated October 8, 2026 · Source: Telstra: access your modem settings
What 10.0.0.138 is
10.0.0.138 is a private address from the 10.0.0.0/8 range. It is not a common factory default: it is best known from older gateways that the Australian provider Telstra (BigPond) supplied, such as the Netgear EVG2000 in our database, which used admin / admin.
Current Telstra modems use another address
If you have a newer Telstra modem, 10.0.0.138 is probably not your address. According to Telstra, its Smart Modems open at http://mymodem or 192.168.0.1, with the username admin:
- Smart Modem Gen 3 and Gen 4: the password is the Wi-Fi password printed on the bottom of the modem.
- Smart Modem Gen 1.1 and Gen 2: the password is
Telstra. - Telstra Gateway Max: the page opens by name at
http://telstra.gateway.
How to tell which address you need
Look at the default gateway on a connected device: here is how. If it shows 10.0.0.138, open http://10.0.0.138; if it shows 192.168.0.1, use that address or mymodem. Do not confuse 10.0.0.138 with 10.0.0.1, the address of Xfinity and many other cable gateways.
10.0.0.138: frequently asked questions
What is the password for 10.0.0.138?
On older Telstra BigPond gateways such as the Netgear EVG2000 it was admin / admin. Current Telstra Smart Modems use 192.168.0.1 with admin and either Telstra or the Wi-Fi password from the label.
Is 10.0.0.138 the same as 10.0.0.1?
No. They are different addresses in the same private range; open the one shown as the default gateway on your device.
What is mymodem?
A name that current Telstra Smart Modems answer to inside your home network. It opens the same page as 192.168.0.1.
Brands using 10.0.0.138
