192.168.1.245 Login Admin
To access the router admin page, simply enter 192.168.1.245 into your web browser's address bar or click the link below. This will direct you to the login page of your router's control panel.
The IP address displayed here is typically the default address for your router’s admin interface. However, please ensure that you are connected to the same network as the router for this to work correctly. If you are using a different network or have made custom settings, the address may vary.
How to log in to 192.168.1.245
- Connect to the router. Join its Wi-Fi network or plug a computer into one of its LAN ports. Mobile data will not work.
- Open the admin page. Type
http://192.168.1.245into the browser’s address bar (not the search box) and press Enter. - Accept the certificate warning if one appears. Routers use self-signed certificates, so “Not secure” on this page is normal inside your own network.
- Enter the username and password. Look at the sticker on the bottom of the router first: many models print a unique password there. The most common factory pair for this address is
admin/admin; the full list is in the tables below. - Change the default password in the administration or system section as soon as you are in.
Default logins for IP 192.168.1.245
Who uses 192.168.1.245 by default
Router models in our database with 192.168.1.245 as the default address: 1. Brands: 1.
Brands with the most models on 192.168.1.245
| Brand | Models |
|---|---|
| Linksys | 1 |
Most common default username and password on 192.168.1.245
| Username | Password | Models |
|---|---|---|
admin |
admin |
1 (100%) |
“—” means there is no factory value: the field is left empty or a unique password is printed on the router’s label.
Default credentials work only until someone changes them. If none of these pairs fits, the password was changed; a factory reset restores the default.
Updated October 23, 2026 · Source: SpeedGuide, Linksys WAP4400N
192.168.1.245 is a Linksys access point address
192.168.1.245 is the factory address of the Linksys WAP4400N, a business Wireless-N access point with PoE. The high address lets it sit next to a Linksys router at 192.168.1.1 without a conflict. The default login is admin / admin. The related WAP4410N from Cisco’s small-business line is reported at the same address.
How to reach it
An access point does not hand out addresses. If your computer is connected only to it, give the computer a fixed address first:
- Set the computer’s network adapter to
192.168.1.200, mask255.255.255.0. - Connect it to the access point with a cable.
- Open
http://192.168.1.245and sign in withadmin/admin. - Change the password, set an address that fits your network, then switch the computer back to automatic.
Reset
A hard reset returns the unit to 192.168.1.245 and admin / admin. Users on Cisco’s community forum report holding the reset button for about 30 seconds on the WAP4400N; check the manual for your unit.
When 192.168.1.245 does not open
- The access point has a new address set by an administrator or taken from DHCP. Look in the router’s device list.
- Your network is not 192.168.1.x. Use the fixed-address steps above.
- You need the router. Check your default gateway.
192.168.1.245: frequently asked questions
What uses 192.168.1.245?
The Linksys WAP4400N access point by default.
What is the password for 192.168.1.245?
admin / admin on the Linksys WAP4400N.
Brands using 192.168.1.245
